Ageing structures need to be protected on the outside our website. The paint will only last longer if you apply a new layer of paint. Preparation is key, and there are TWELVE different modes of preparation.

Twelve professional steps can solve the need to paint exteriors. External painting will make the home look beautiful and increase its value.

Twelve Rightful Steps to Successful Exterior Painting

Melbourne residents make sure that their housing complexes meet their aesthetic preferences.

Step 1

Pressure washing Walls

To ensure uniform and complete coverage, the paint must be applied to all surfaces of the walls. Priority one is to remove dust and grime that has accumulated over time. Using pressure washers, the grime buildup is cleaned off. Pressure washing before exterior painting is carried out by using a particular technique. The washer will be moved from the top to the bottom of the wall in a smooth and controlled way. Each stroke overlaps by 8 inches until the entire surface is clean.

Step 2

Scratched Surfaces and Broken Surfaces: Repairing them

Exterior Painting Melbourne’s next step is to eliminate cracks. An initial inspection is made of the damaged portions of the walls. Take detailed notes about the wood and metal that is broken, the masonry, stucco or sliding. The epoxy filler should be applied using a spackle-knife. After it dries, you can use a medium-grit block to do light sanding.

Step 3

Remove Loose Paint

As soon as the exterior is completely dry, perform a second examination and note any signs of loose or chipped painting. After placing the dropcloths on the floor, the loose and damaged paint can be removed by using a medium-grit paint scraper.

Step 4

Sanding, washing and cleaning

Paints cannot adhere to rough and dirty surfaces. After cleaning the surface and trimming it, let it dry. Sanding is then done. Sanding and scraping is essential, then the loose painted is peeled so that the new paint can adhere firmly.

Step 5

Trimming Caulk

The visible gaps between the homes can be filled using exterior caulk guns and caulk. The windows and door frames can also be trimmed using the same materials. Caulk can be applied on surfaces where different materials meet, such as brick and sidings.

Step 6

Priming the Stains

Further, the visible stains as well as wood knots on exterior walls will be examined. With the aid of a paintbrush, a coat of primer is applied to block the stain.

Step 7

Exterior Lights Protect Windows and Doors

Plastic sheeting and painters tape can protect light fixtures, doorways, and windows.

Step 8

Exterior Painting

The paint sprayer will be loaded with an exterior flat or eggshell paint color. On the basis of the intensity of hue, the house will receive one or even two coats. The same painting technique must be used from top-to-bottom, with each stroke being overlapped by 8 inch. To ensure a proper and wider coverage, start with a prime coat. The primer coat reveals the color change from dark to bright exterior paint. Prime is only applied when painting for the very first time. However, it is not needed if repainting.

Step 9

Mixing multiple cans of Paint

The paint cans are mixed in a 5-gallon container. The mixing is what ensures the uniformity of exterior painting. Professionals are adept at boxing up the paint.

Step 10

Painting the entire surface of the canvas from the topmost corner to the bottom

Rolling the paintbrush across the surface from the top is the most effective way to prevent streaks. When painting with this technique, the painters use extreme gravity. They never change their technique as they lose the smoothness when painting top to bottom. Drips are required at frequent times. The paintbrush must always be full, so that the painter can smooth any messes.

Step 11

Paint your doors and trims

After removing all plastic sheets protecting light fixtures, doors and windows from damage, paint two coats of semi-gloss exterior paint on doors, windows and woodwork. Next, the dropcloths are removed.

Step 12

Sealing the last paints at the end

The paint that remains is not allowed to dry. After the painting has been completed, paint cans that have been opened are closed properly with their lids. Close the lid using a soft hammer and a mallet. The opening is covered with a plastic wrap to make the seal tighter. The remaining paint can also be used for interior painting.